How to Format a Book in Word

How do you format a book in Microsoft Word? Set the page size to your trim size, set the margins, build the book with Word styles instead of manual spacing,…

An open manuscript and a closed laptop on a wooden desk beside a cup of coffee and a pencil in warm morning light

How do you format a book in Microsoft Word? Set the page size to your trim size, set the margins, build the book with Word styles instead of manual spacing, start each chapter on a new page, add page numbers and running headers, then export a clean PDF for upload. A well-formatted Word file is all most self-published nonfiction books need — the formatting is a one-time setup, and then the book writes itself into shape.

What page size should you use in Word?

Your page size is your book’s trim size — the size of the finished printed page. For most nonfiction books, 6 x 9 inches is the standard choice: it looks professional, reads well, and is one of the sizes Amazon KDP supports. A workbook or a book with wide tables may suit 8.5 x 11 inches instead.

Set it before you write, not after. In Word, go to Layout, then Size, then More Paper Sizes, and enter your width and height. If you change the size after the book is written, your page breaks, images, and tables will all shift, and you will re-do work you already finished.

Pick one size and stick to it. The trim size also decides your cover size later, so changing it mid-project ripples into the cover too.

How do you set margins for a printed book?

Margins are the white space around your text, and a printed book needs more of it than a document you print at home — because part of the page disappears into the spine.

In Word, go to Layout, then Margins, then Custom Margins. A workable starting point for a 6 x 9 inch book is about 0.75 inches on the top and outside edges, 0.75 inches on the bottom, and 0.75 to 1 inch on the inside (gutter) edge, depending on how thick your book is. Thicker books need a wider gutter so the text near the spine stays readable.

KDP has minimum margin requirements that change with trim size and page count, so before you upload, check the current requirements on KDP’s own help pages and adjust if Word’s defaults fall short. Getting the margins right now saves a rejection later.

How do you format chapters and headings?

Use Word styles — Heading 1 for chapter titles, Heading 2 for sections inside a chapter, Normal for body text. This is the single most important formatting decision in the whole book.

Styles do three things manual formatting cannot. First, they keep every chapter looking identical without you remembering what font size you used three chapters ago. Second, they let Word build your table of contents automatically: References, then Table of Contents, then Automatic Table. Third, they make the ebook version work — KDP and other platforms use heading styles to build the navigation readers tap through.

Set up your styles once, early. Choose a readable body font at 11 or 12 points with 1.15 or 1.5 line spacing, a clear chapter-title style, and a section-heading style. Then write the whole book with those styles and nothing else. Never format a heading by selecting text and making it bigger and bolder by hand — that is how a book ends up with five different-looking chapters.

How do you start each chapter on a new page?

Insert a page break, not a stack of empty paragraphs. Put your cursor at the start of the chapter title and press Ctrl+Enter (Cmd+Return on a Mac), or use Insert, then Page Break.

Empty paragraphs to push text down are the most common formatting mistake in self-published books. They look fine on your screen and then break everywhere else: an empty paragraph at the top of a page leaves a gap, an ereader reflows the text and your “spacing” lands in the middle of a page, and a small edit early in the book pushes every gap to a different place. Page breaks are exact and they survive reflowing.

The same rule applies inside chapters. Use paragraph spacing (the space-before and space-after settings in the Paragraph dialog) instead of pressing Enter twice between paragraphs. One blank line in the file should mean one deliberate break, and nothing else.

How do you add page numbers and headers?

Page numbers go in the footer, and headers carry the book title or the chapter title at the top of the page. Both are set in the Header and Footer tools, and both should be set up after the body text is finished, because they sit on top of everything else.

A few details that matter. Use section breaks (Layout, then Breaks, then Next Page) if you want the front matter — title page, copyright page, contents — without page numbers, and the main text numbered from chapter one. Use “Different First Page” for the first page of each chapter if you do not want a header on the chapter opening page. Keep headers short: the book title on one side and the chapter title on the other is the classic arrangement, and for a simple nonfiction book the book title alone is enough.

Check the result by flipping through the whole document in Print Layout view. Page numbers that skip, headers that repeat the wrong chapter title, and a footer that overlaps the text are all easy to spot and quick to fix now — and embarrassing to find in a printed proof copy.

How do you export a print-ready file for KDP?

When the book is finished, export a PDF: File, then Save As or Export, and choose PDF. Before you upload it anywhere, open the PDF and check it page by page.

Your pre-upload checklist is short. Every chapter starts on a new page. No blank pages where a page break went wrong. Images sit inside the margins and are not stretched or pixelated. The table of contents lists the right page numbers — update it (right-click, Update Field, Update entire table) before exporting, because Word does not update it automatically. The front matter pages have no page number or header where you decided they should not.

Upload that PDF to KDP as your interior file. KDP shows you a preview of exactly how the printed book will look — read it, do not skim it. If something looks wrong in the preview, it will look wrong in print. Fix it in Word, export again, and upload again. It costs nothing to re-upload, and it costs a reader’s trust to ship a book with a formatting error on page one.

A formatting checklist

  • Page size set to the trim size before writing, not after.
  • Margins set with a real gutter for the spine, checked against KDP’s current minimums.
  • Chapters built with Heading 1, sections with Heading 2, body text with Normal — no hand-formatted headings.
  • Every chapter starts with a page break, never with empty paragraphs.
  • Paragraph spacing set in the Paragraph dialog, not with extra Enter presses.
  • Page numbers in the footer, headers short, front matter unnumbered where it should be.
  • Table of contents updated before export, PDF checked page by page in the KDP preview.

Tick every box and your Word file is ready for KDP — no special software, no designer, and no re-formatting later.

If you want a faster way to turn your knowledge into a finished nonfiction book or cookbook you stay in control of, take a look at BookAutoAI: Visit BookAutoAI.com

Start here: if you are new to publishing on Amazon, begin with our KDP Publishing hub and read AI Book Formatting for how AI tools fit into the formatting step.

Leave a Reply

Your email address will not be published. Required fields are marked *

From reading to writing

The next chapter
starts with your idea.

See your reader promise and chapter plan. Make the first step yours.

Build my free book plan No account or card required to see your plan.